41516 Tentro
| Teil | ID | Quantity | Farbe | Beschreibung |
|---|
 |
11090 | 2 | Schwarz | Bar Holder with Clip |
 |
11477 | 4 | Orange | Slope Curved 2 x 1 No Studs [1/2 Bow] |
 |
14417 | 4 | Dunkelblaugrau | Plate Special 1 x 2 with 5.9mm Centre Side Towball |
 |
14418 | 4 | Hellblaugrau | Plate Special 1 x 2 5.9mm Towball Socket |
 |
15208 | 1 | Weiß | Plate Special 1 x 2 with Three Teeth [Tri-Tooth] |
 |
2540 | 2 | Orange | Plate Special 1 x 2 Side Handle [Free Ends] |
 |
3004 | 1 | Orange | Brick 1 x 2 |
 |
3022 | 3 | Schwarz | Plate 2 x 2 |
 |
3023 | 2 | Orange | Plate 1 x 2 |
|
3023 | 1 | Orange | Plate 1 x 2 (Ersatzteil) |
 |
3069b | 4 | Orange | Tile 1 x 2 with Groove |
 |
32474pr1001 | 2 | Weiß | Technic Ball Joint with Black Eye Print |
 |
3679 | 1 | Hellblaugrau | Turntable 2 x 2 Plate - Top |
 |
3680 | 1 | Schwarz | Turntable 2 x 2 Plate, Base |
 |
3937 | 1 | Schwarz | Hinge Brick 1 x 2 Base |
 |
3941 | 1 | Orange | Brick Round 2 x 2 with Axle Hole |
 |
3942c | 1 | Orange | Cone 2 x 2 x 2 with Completely Open Stud |
 |
44301b | 4 | Schwarz | Hinge Plate 1 x 2 Locking with 1 Finger On End, without Groove |
 |
44302a | 4 | Dunkelblaugrau | Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth |
 |
54200 | 4 | Orange | Slope 30° 1 x 1 x 2/3 (Cheese Slope) |
|
54200 | 1 | Orange | Slope 30° 1 x 1 x 2/3 (Cheese Slope) (Ersatzteil) |
 |
6134 | 1 | Hellblaugrau | Hinge Brick 2 x 2 Top Plate Thin |
 |
6141 | 1 | Trans-Orange | Plate Round 1 x 1 with Solid Stud (Ersatzteil) |
|
6141 | 16 | Trans-Orange | Plate Round 1 x 1 with Solid Stud |
 |
85984 | 1 | Schwarz | Slope 30° 1 x 2 x 2/3 |
 |
87087 | 2 | Schwarz | Brick Special 1 x 1 with Stud on 1 Side |
 |
87747 | 1 | Schwarz | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium (Ersatzteil) |
|
87747 | 2 | Schwarz | Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium |
 |
99780 | 1 | Schwarz | Bracket 1 x 2 - 1 x 2 Inverted |